JIS standard for RTD
Thứ Sáu,
12/12/2025
Extracted from JIS C 1604-1997
JPt100 depends on JIS C 1604-1989.
R100/R0 of the resistor
| Symbol | Nominal resistance(Ω at 0℃) | R100/R0 value |
|---|---|---|
| Pt100 | 100 | 1.3851 |
| JPt100 | 100 | 1.3916 |
(NOTE) R100 is the resistance of the resistance elements at 100℃ R0 is the resistance of the resistor at 0℃
Classification according to operating temperature range
| Symbol | Classification | Operating temperature range(℃) |
|---|---|---|
| L | For low temperature | -200 ～ 100 |
| M | For medium temperature | 0 ～ 350 |
| H | For high temperature | 0 ～ 650(*) |
（*）The sheathed RTD and JPt100 shall be 500℃.
Class and specified current
| Symbol | Class | Tolerance(℃) | Specified current (mA) |
|---|---|---|---|
| Pt100 (JPt100) |
A | ±(0.15+0.002|t|) | 0.5、1、2 |
| B | ±(0.3+0.005|t|) | 0.5、1、2、(5) |
(NOTE) |t| is the measured temperature in degrees Celsius, which is independent of the + and – symbol.
Temperature tolerance
| Measured temperature | Tolerance(℃) | |
|---|---|---|
| Class A | Class B | |
| -200 | ±0.55 | ±1.3 |
| -100 | ±0.35 | ±0.8 |
| 0 | ±0.15 | ±0.3 |
| 100 | ±0.35 | ±0.8 |
| 200 | ±0.55 | ±1.3 |
| 300 | ±0.75 | ±1.8 |
| 400 | ±0.95 | ±2.3 |
| 500 | ±1.15 | ±2.8 |
| 600 | ±1.35 | ±3.3 |
| 650 | ±1.45 | ±33.6 |
Insulation resistance and withstand voltage
| Test temperature(℃) | Insulation resistance(MΩ) | Test voltage(V) |
|---|---|---|
| Room temperature | 100 | 10 ～ 100 |
| 100 ～ 300 | 10 | 10 or less |
| 301 ～ 500 | 2 | |
| 501 ～ 650(*) | 0.5 |
（*）Not applicable to sheathed RTD and JPt100.
The withstand voltage shall be withstanded when the test RTD is kept at room temperature and an AC voltage with a 500V close to the sine wave of frequency 50Hz or 60Hz is applied between the terminal and the protective tube for one minute. However, for those with a protective tube outside diameter 4.5mm or less, the test voltageshall be 1/2.
Danh Mục
Tin tức nổi bật
Symbols for types of compensating lead wires
12/12/2025
Covering of compensating leads
12/12/2025
About validation
12/12/2025
Tin Tức Liên Quan
12/12/2025
About thermowell (perforated metal protection tube)
Material of the thermowell Thermo-well materials include SUS304, 316, 316L, 310S, Hastelloy C（Hastelloy®）, Monel（Monel®）, Nickel, 50Co30Cr, Titanium, Inconel（Inconel®）, etc. We also...
Đọc tiếp >>
12/12/2025
Symbols for types of compensating lead wires
Check the type and accuracy of the thermocouple and select the type. In combinationYou use.Thermocouple type Conductor material JIS C 1610-1995 JIS C 1610-2012(IEC...
Đọc tiếp >>
12/12/2025
Covering of compensating leads
Type of covering of compensating lead wire PVC coating Vinyl is used for insulation of standard type general compensating lead wires.Operating temperature...
Đọc tiếp >>
12/12/2025
About validation
What is validation? Validation is defined in the Ministry’s Ordinance on Pharmaceutical and Medical Equipment GMP(Good Manufacturing Practice as “Validation is...
Đọc tiếp >>
12/12/2025
Calibration Certificate with JCSS Certification Symbol
JCSS Certification Symbol is only permitted to be used by certified operators complying with the Accreditation Criteria under Article 143...
Đọc tiếp >>
12/12/2025
Traceability system
Temperature standards and temperature measurement systems maintain traceability to national standards. Contact thermometers Radiation thermometer [product danhmuc="jcss-thermal-calibration-service" limit="70" title="List of JCSS thermal calibration...
Đọc tiếp >>
12/12/2025
Our Calibration equipment
Classification Working standard/calibration equipment Calibration temperature(℃) Product under calibration Fixed point calibration Triple point apparatus of mercury -38.8344 Platinum resistance thermometer, thermocouple, and thermometer with indicator Freezing point...
Đọc tiếp >>